If you’re using a Creality K2 Plus and looking for a serious upgrade to your extrusion system, this is one you don’t want to miss. Today I’m installing the brand new DXC2 Extruder by Phaetus & D3vil Design — and it brings something really exciting to the table: a magnetic quick release system that makes maintenance faster and easier than ever.
This isn’t just another upgrade — it’s a smarter way to work with your printer.
🎥 Watch the full installation and test here:
▶ How to Install the DXC2 Extruder on Creality K2 Plus
Why Upgrade to the DXC2 Extruder?
The stock extruder on the K2 Plus is already solid, but the DXC2 takes things further with better engineering and some very practical improvements.
- Magnetic quick release system – open the extruder in seconds for maintenance.
- Dual gear drive – stronger grip on filament and more consistent extrusion.
- Cleaner layers – helps reduce VFA (Vertical Fine Artifacts).
- Flexible & rigid filament support – better control across materials.
- Built-in filament cutter – smoother workflow for multi-material printing.
If you like pushing your printer with speed or different materials, this upgrade makes a real difference.
What Makes This Upgrade Special?
The standout feature here is the magnetic quick release mechanism. Instead of dealing with screws and long disassembly steps, you can quickly access the internal components of the extruder.
This is especially useful for:
- Fixing clogs quickly
- Cleaning the extruder
- Swapping components
It’s one of those upgrades you don’t realize you need… until you try it.
What You’ll Learn in the Video
In the video, I guide you through the full installation process on the Creality K2 Plus, step by step:
- How to remove the stock extruder safely
- Installing the DXC2 extruder correctly
- Transferring sensors and aligning them properly
- Understanding how the magnetic system works
- Installing a chain riser to reduce stress on the setup
- Running real print tests to validate performance
This is a complete upgrade guide — perfect whether you’re experienced or trying your first serious mod.
Installation Overview
The installation is relatively straightforward, but there are a few key things to pay attention to:
- Remove the stock extruder carefully and disconnect all components.
- Transfer sensors to the DXC2 with the correct orientation.
- Mount the new extruder securely onto the K2 Plus.
- Install the chain riser to improve cable routing and reduce tension.
- Power on and test extrusion before starting prints.
⚠️ Keep in mind: the unit shown in the video is a beta version, so final retail versions may have small differences.
Real Print Tests & Results
After installation, I ran several test prints to see how the DXC2 performs in real conditions:
- Bed adhesion test – checking consistency on first layers
- Benchy test – evaluating overall print quality
- Multicolor stress test – testing reliability under complex conditions
The results show improved consistency, smoother extrusion, and better overall print quality — especially when pushing speed or switching materials.
Extra Upgrade: Chain Riser for Better Cable Management
One small but important addition in this setup is the chain riser, which helps reduce stress on the extruder and cables.
This improves:
- Cable longevity
- Extruder stability during movement
- Overall reliability in long prints
It’s a simple upgrade that pairs really well with the DXC2.
Links & Resources
If you want to explore or replicate this setup, here are the resources used in the video:
- Phaetus DXC2 Extruder (D3vil Design)
- Creality K2 Plus
- Creality K2
- Creality K2 Pro
- Mintion Nutopress Tool
- SpinMaker Chip Model
Final Thoughts
The DXC2 Extruder is one of those upgrades that improves both performance and usability. It’s not just about better prints — it’s about making your printer easier to maintain and more enjoyable to use.
If you’re serious about getting the most out of your Creality K2 Plus, this upgrade is definitely worth considering.
Watch the Full Video
For the full installation process, real-world tests, and final thoughts, check out the video:
▶ Watch: DXC2 Extruder Installation on Creality K2 Plus
💬 Let me know in the comments: What should I test next with this extruder — extreme speed or advanced materials?
I hope you found this post useful and informative. If you have any questions or feedback, feel free to leave a comment below or contact me on my Instagram profile: Frikarte3D Happy Printing! 😊
- Instagram: https://www.instagram.com/frikarte3d/
- Facebook: https://www.facebook.com/Frikarte3D
- Discord: https://discord.gg/z6WNVUmmMZ
- Twitter / X: https://twitter.com/Frikarte3D
- YouTube: https://www.youtube.com/@Frikarte3D
- TikTok: https://tiktok.com/@frikarte3d
- Thangs: https://thangs.com/designer/frikarte3D
- Creality Cloud: https://www.crealitycloud.com/user/9196945991
- Cults3D: https://cults3d.com/en/users/Frikarte3D
- Printables: https://www.printables.com/@Frikarte3D
- MakerWorld: https://makerworld.com/en/u/4073889886
- MakerOnline: https://www.makeronline.com/en/user/personalInfo/627a2080-1d52-4478-811f-5b761273f604.html
- Thingiverse: https://www.thingiverse.com/frikarte3d
